Specification Overview

  • Name: HERMETIC™ Neat Floor
  • Finish: Gloss or satin
  • Cured thickness: @ 40 to 65 mils
  • Surface preparation and detailed application instructions per manufacturer
  • Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671

Sample Color Chart

NOTE: The colors depicted on this technical document may not illustrate the exact color. Contact a technical support representative for a more accurate color sample. Custom colors available upon request. *Novalac Only

Physical Properties

Property

Test

Result
VOC Content N/a 0 g/l
Shore D Hardness ASTM D-2240 72-83
Water Absorption (2hr boil) ASTM D-570 0.03-0.19 %
Toxicity N/A None*
Heat Distortion Temperature ASTM D-648 120-130 F / 55 C
Compressive Strength ASTM D-695 7,500-13,400 psi
Tensile Strength ASTM D-638 2,100-4,200 psi
Flexural Strength ASTM D-790 4,500-6,500 psi
Abrasion Resistance ** ASTM D-4060 9-30 mg loss
Slant Shear ASTM C-882 100% concrete failure
Flammability ASTM D-635 Self-extinguishing
Flame Spread Rate (NFPA 101) ASTM E-84 Class A
Elongation at Break ASTM D-638 4.5 % minimum
Perm Rating ASTM E-96-13 >0.10 @ 16 mils. Class 1
Chemical Resistance Contact technical representative for chart
Coefficient of Friction Adjusted per requirement. Generally 0.50 to 0.80
COF Guidelines: ADA Flat Surfaces
ADA Inclined Surfaces
OSHA
NFPA		 0.60
0.80
0.50
0.68
* FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles

Elite Crete Systems, Inc.

18703 W Little York Rd Suite # 304
Katy, Texas 77449

P: (713) 823-5410

wesley.whittington@elitecrete.com

The information herein is general information to assist our customers in determining whether our products are suitable for their specific applications. Our products are intended for sale to commercial and industrial customers. We require that customers should inspect and test our products before use to satisfy themselves as to the content and suitability for the applications they intend to use our products for. Nothing herein shall constitute any warranty expressed or implied, including any warranty of merchantability or fitness for a particular purpose, nor is replacement of our materials and in no event shall we be liable for incidental or consequential damages.